Quanzhou Industry Leveraged "6. 18" &Nbsp, Accelerating Pformation Of Development Mode.

The Ninth "6. 18" is at hand.

Since the eighth "6. 18", Quanzhou has held 12 special docking activities, and initially achieved more than 100 cooperation intentions, with a total investment of about 2000000000 yuan.

This year, Quanzhou will hold Dehua County functional ceramics and calcium carbonate project special docking sessions during the "6 / 18" period.

Borrow "6. 18", Quanzhou, a big manufacturing city, plug in.

At present, speeding up the pformation of development mode has become a consensus among many springs and enterprises. Relying on technology and creativity, springs enterprises aim at emerging and high-end markets, and seize the opportunities for development.

The most innovative industrial design is "gold finger" for the manufacturing industry.

Last year alone, the Quanzhou Dieter industrial design center increased the sales volume of 160 million yuan for Xun Xing zipper, and the charm of industrial design "turning stones into gold" is evident.

On this year's "6. 18", the center will carry out research and development integrated system with independent research and development industrial accessories to participate in the theme exhibition of creative industries.

"It would take 2 days to design such a zipper, now only 3 to 4 minutes."

Yang Xuetai, director of the center, said that Quanzhou is a big manufacturing city, and industrial design can directly butt the manufacturing industry to help enterprises avoid homogenization of products and get out of the bottom of the industrial value chain.

This system is like asking many designers to send "golden fingers" to enterprises, which will greatly save labor costs and improve labor efficiency.

Wang Shirong, chairman of the company, the leading company of paint and coatings, told reporters that the company is occupying the blue sea of nuclear power coating industry.

"We will work with Fudan University to develop nuclear power coatings."

For the letter and company, this upcoming dream of "6. 18" this year is like manufacturing from the cloth manufacturing to the advanced bulletproof vest.

Because of its excellent radiation protection capability, nuclear power coatings can also be used in the wide range of civilian areas such as maternity dress, family decoration, workshop protection, and so on.

At present, there are few enterprises in the field of water testing in China, and the supply of coatings for domestic nuclear power plants also relies heavily on foreign countries. "The market gap is our business opportunity".

"At present, the utilization rate of domestic asphalt pavement after aging is only 20%, and the rest are mostly landfill, resulting in environmental pollution and waste of resources. Through our recycling equipment, the utilization rate of asphalt waste can reach 100%."

Pointing to a large furnace with large combustion furnaces and rollers, five or six feet tall, Gao Daile, director of technology development of Fujian tie Tuo Machinery Co., Ltd.

The equipment was one of the achievements of last year's "6. 18" project. It used hot air baking, flexible technology and two combustion to overcome the technical problems such as volatilization, easy adhesion and release of toxic gas in the heating process of asphalt, and became a favorite market.

In this year's "6. 18", the company will work with Chang'an University to study the standards, design formulations, verification methods and equipment improvements of old asphalt recycling technology.

Breakthroughs in thinking make industry more intelligent.

A few days ago, reporters visited Licheng, Quanzhou Development Zone and Quanzhou Taiwan business investment zone to participate in the "6. 18" project.

Use the TV remote control to make phone calls, surf the Internet, watch TV plays with mobile phones, turn complex network lines, telephone lines and TV cables into one line or wireless access.

Huang Conglong, deputy general manager of Fujian Shenzhou electronic Limited by Share Ltd, described the moving scenes after the three networks convergence.

As a sharp market catchmaker, Shenzhou electronics has already applied to join the NGB (next generation broadcasting network) working group of the State Administration of radio, film and television to participate in the development and formulation of national industry standards.

"6. 18" this year, we will sign up with the National Engineering Laboratory of digital audio codec technology to build a joint laboratory of "three networks convergence" terminal technology research.

The circular function soles, such as the power boat shape and the big "rocking shoes", will automatically shake your body to maintain your body balance, so that you can easily lose weight and shape your body during walking.

This year, the manufacturer of Fujian Zhengda Group will "wear" this "rocking shoes" to "6. 18" and apply the "modified polypropylene microcellular foam shoes" to seek technical docking and cooperation.

Huang Zhenji, chief technology officer, said that this kind of shoe material is not only better than ordinary EVA material in flexibility, elasticity and heat resistance, but also has 100% utilization rate, degradation rate and recycling rate.

"For traditional industries such as footwear industry, only by taking the road of differentiation of technology and innovation can the industry rise."

In addition, with the development thinking, Fujian Fu Lian Fine Arts Co., Ltd. hopes to make the warp knitted spacer fabrics originally used in the civil fields such as mattresses, pillows and so on, exert its advantages such as breathability, pressure relief and biodegradability, and enter the fields of medical treatment, construction and other fields, and seek technical support for this pformation by embarking on "6. 18".