Sports Shoes And Vulcanized Shoes Continue To Heat Up PK, High Inventory Is Hindered.

< p > vulcanized < a href= "//www.sjfzxm.com/" target= "_blank" > shoes < /a > vulcanization shoe is made of rubber, fabric or a href= "a", "leather", "rubber" as base material, and processed by bonding, molding or injection, and then vulcanized under certain temperature and pressure, giving upper and upper sole high strength and high elasticity, and making the two firmly bonded together, so it is called vulcanized shoes.

Vulcanized leather shoes are also known as vulcanized leather shoes.

< /p >

< p > What are the advantages of vulcanized shoes?

Fashion, good-looking, with Jeans Classic; dirty is relatively good, and the price is moderate.

< /p >

< p > Why do you care for vulcanized shoes?

Insiders said that the vulcanized shoes were relatively unpopular, and the domestic vulcanized footwear market was not only a leader, but also a brand enterprise.

In addition, there are vulcanized shoe manufacturers revealed that the annual growth rate of vulcanized shoes is more than 30%, online sales of vulcanized shoes in 2011 reached about 20000000 pairs.

Therefore, many domestic self-employed and footwear enterprises have entered the field of vulcanized shoes, and the famous domestic sports shoes brands have launched the category of vulcanized shoes.

However, due to the difference between the production technology of vulcanized shoes and sports shoes, most of the sports shoes enterprises are finished by the form of foundry.

< /p >

< p > the word "vulcanization" has its historic significance. Since the original natural rubber product was named as crosslinking agent with sulfur as the crosslinking agent, with the development of the rubber industry, a variety of non sulfur crosslinking agents can be used for cross-linking.

Therefore, the more scientific significance of sulfidation should be "crosslinking" or "bridging", that is, the process of linear polymer formation through cross-linking.

Physically, it is the process of pforming plastic rubber into elastic rubber or hard rubber.

The meaning of "vulcanization" includes not only the actual cross-linking process, but also the method of cross-linking.

< /p >

< p > through the measurement of the elongation strength of rubber material (or vulcanizer), it can be seen that the whole vulcanization process can be divided into four stages: vulcanization induction, pre sulphur, positive vulcanization and sulphur (for natural rubber).

During the vulcanization induction period (scorching time), cross-linking has not yet started, and the rubber has good fluidity.

This stage determines the scorch and processing safety of the compound.

At the end of this stage, the rubber starts to crosslink and loses mobility.

The length of vulcanization induction period depends on the properties of the raw rubber, mainly depends on the auxiliaries used. For example, the delayed coking accelerant can get longer scorching time and higher processing safety.

After vulcanization induction period, it is a pre vulcanization stage at a certain speed.

The degree of crosslinking in the pre vulcanization period is low, even if the breaking strength of the vulcanizate is not reached at the later stage, the elasticity can not reach the expected level, but the tear and dynamic crack performance is better than the corresponding vulcanization.

After reaching the normal vulcanization stage, the physical properties of the vulcanizates reach or close to the best point, or achieve the full balance of the properties.

After being vulcanized, there are two cases: the natural rubber has a "return to the original" phenomenon, and the elongation strength of most synthetic rubber (except butyl rubber) continues to increase.

< /p >

< p > {page_break} < /p >

< p > < /p >.

< p > for any rubber, vulcanization not only produces crosslinking, but also produces chains and molecular chains due to heat and other factors.

This phenomenon runs through the whole vulcanization process.

In the sulphur stage, if the crosslinking is still dominant, the rubber will harden and the elongation strength will continue to rise. Otherwise, the rubber will become soft when it becomes soft.

< /p >

< p > compared with the sales channels of sports shoes, the channel mode of vulcanized shoes is mostly carried out by some super retailers or single stores.

Vulcanized shoes because of the single category, so in the channel or strive for small and refined, thereby improving the profitability of single shop.

The enterprises with vulcanized shoes have adopted the mode of consignment, that is, to build products into all kinds of cowboy trend shops and foreign trade shops in the first tier cities.

This channel implantation mode does not increase the cash burden and does not generate inventory for the selling point, and replenish the company's local warehousing and logistics center every day according to the sales volume. For shoe companies, it saves the high cost of expanding terminal.

This is an excellent example of small and refined channels, which is worthy of reference for shoe companies.

In addition, young people like online shopping, so the electricity supplier is also a good channel.

Many vulcanized footwear enterprises are trying to expand the share of the online market, and launch online special contributions to expand the online market.

< /p >